At a molecular level, CBD (short for cannabidiol) is CBD, regardless of which plant it comes from.  The only difference comes from the full extract that is taken from the plants.  Here’s what we mean:  Once the plants are harvested, the lab removes the nutrients, including CBD, from the plants in the form of a gooey extract.  This extract includes the CBD, but also so much more and this gooey extract is what goes into all the CBD products*.  There are actually many cannabinoids other than just cannabidiol (CBD).  Some are CBC, CBG, CBN and even THC.  THC is the compound found in marijuana that causes the “high” or psychotropic or euphoric effect.  As most of us know, marijuana naturally has a fairly high level of this compound.  Hemp naturally has a very low level, so low that no one reports any sort of high when using the extract from hemp.
In the U.S., we live in a culture where more is often perceived as being better.  And it’s easy, without even thinking about it, to apply that approach to CBD dosing. But when it comes to CBD, more is not necessarily better. In fact, for many, less CBD is more effective. One way to determine your optimal dosage is to start with a small amount of CBD for a couple weeks and then slowly increase your dosage, carefully taking note of symptoms, until you’re seeing the results you want.

You then take your first drop of CBD oil, wait 45 minutes, then ask the questions again. If you feel no different and there’s no change in the way you answer those questions, you increase the dose by small increments until you do notice a difference. You can continue this process over several days – and at some point, you’ll find that taking more doesn’t change your scores. That is your minimum effective dose.

Strength is also an extremely important consideration. Beginners may find that it’s easier to control dosage using a lower strength tincture. On the other hand, experienced CBD consumers know that high strength tinctures are more cost effective. Although stronger tinctures cost more, you get more CBD oil and other beneficial cannabinoids in each drop. Most CBD brands offer more than one option for strength.
Upon investigation there are companies that engage in the use of “window dressing.” For example, one popular brand brags that they use the superfood moringa. This of course lures people in. But keep in mind that for added antioxidant benefit, you would need to ingest 7.5 g (7,500 mg) within the context of a meal or beverage. The entire 30 ml bottle of said brand contains 33.3 mg; so at the recommended dose of 1 ml daily, the daily dose of moringa would only be 1.11 mg.

Also, out of the 50 U.S states, 29 states permit in some way or another the use of medical weed, which includes cannabis CBD oil for specific treatments. So where is the problem? Qualifying for a medical card is the easy part, but the problem is going through long, tiring bureaucratic BS processes with the state’s Board of Health, to try to obtain one.


To be certain you’re getting test results you can trust, look for a CBD oil that’s been tested by someone other than the company selling it. Independent testing companies stake their reputations on every test, so they’re not biased toward manufacturers. These third-party testers are looking to identify what’s actually in the product, whether the manufacturer likes the results or not.
There are over 85 cannabinoids that make up the marijuana plant. The most popular and well known of these is tetrahydrocannabinol, or better known as THC. THC is a psychotropic cannabinoid that causes a high when inhaled or ingested. CBD has no THC. This means those dealing with various forms of pain and depression can safely use CBD to curb negative effects on the body without having to turn to prescription pharmaceuticals.
Similarly, transparency is one of our top concerns when it comes to selecting the best CBD oil tinctures. Every product below is clearly labeled, so you can easily understand how much CBD oil / full spectrum hemp extract is in each bottle. You can also easily find the complete ingredients on the bottle, packaging or the company’s website. These brands are also open about where they source their hemp.
Strength is also an extremely important consideration. Beginners may find that it’s easier to control dosage using a lower strength tincture. On the other hand, experienced CBD consumers know that high strength tinctures are more cost effective. Although stronger tinctures cost more, you get more CBD oil and other beneficial cannabinoids in each drop. Most CBD brands offer more than one option for strength.

Phyto Plus Whole Plant Hemp Cannabidiol extracts, naturally grown, free from insecticides, pesticides and non GMO. Worldwide same day shipping from the Netherlands. Produced with safe, solvent residue free, super critical CO2 extraction, the cleanest extraction method in the industry. If you are wondering where to buy pure cbd oil online in Europe, Phyto Plus is a great option. 
Hello! I do not have a response regarding what you should take, BUT want you to know I am exactly where you are! Three level lumbar fusion on 02/05/18, no staples thank goodness (they used glue), but am weaning myself off of pain meds ( I don’t like their side effects, as you stated). Weaning off the pain meds leaves me susceptible to flare ups when I do my PT or go for my daily walks three times a day. I surely hope someone answers the question you posed, as I would like to know! Wishing you the best of luck in your recovery! Stay strong!

While researchers are calling for more robust studies on the role of CBD on mood disorders, there is promising research that points to CBD’s role as an anxiolytic – which means it has anti-anxiety effects. Another study showed CBD to have antidepressant effects comparable to those of the prescription antidepressant Imipramine. We noted above that CBD increases levels of glutamate and serotonin – and it’s these same neurotransmitters that play a crucial role in mood regulation.
CO2 extraction is one of the most common ways CBD is extracted from the hemp or cannabis plants. This method uses expensive equipment that adjusts temperature and pressure to extract the cannabinoids from the plant material, without damaging them. The other common method is to use solvents like ethanol or butane to extract the plant material. These solvents have to be burned off the final product which may damage the cannabinoids or terpenes in the process. There is also a risk that these solvents may not have burned off completely and could end up in your end product.

However, since the 1950s it has been lumped into the same category of marijuana, and thus the extremely versatile crop was doomed in the United States. Industrial hemp is technically from the same species of plant that psychoactive marijuana comes from. However, it is from a different variety, or subspecies that contains many important differences. The main differences between industrial hemp and marijuana will be discussed below.


Strength is also an extremely important consideration. Beginners may find that it’s easier to control dosage using a lower strength tincture. On the other hand, experienced CBD consumers know that high strength tinctures are more cost effective. Although stronger tinctures cost more, you get more CBD oil and other beneficial cannabinoids in each drop. Most CBD brands offer more than one option for strength.

So, now we’ve covered the difference between marijuana and hemp products, along with the brief discussion on CBD vs THC.  We’ve covered how to decide how much to buy.  And, we’ve covered how to determine which product type is best for you.  (If you’d like to read more very helpful information, please view our Frequently Asked Questions by clicking the button further down the page.)  Below are a few key points about Highland Pharms to wrap up our discussion:
Correct Answer: Each batch of flower AND finished product should be tested by a state certified testing facility for potency, legality and safety. These test results should also be made available to any patient that requests them. These tests should certify 3 things: the amount of CBD contained in the product, the amount of THC in the product (the starting hemp plant material must test below 0.3%), and the lack of mold or toxic pesticides.
Also, out of the 50 U.S states, 29 states permit in some way or another the use of medical weed, which includes cannabis CBD oil for specific treatments. So where is the problem? Qualifying for a medical card is the easy part, but the problem is going through long, tiring bureaucratic BS processes with the state’s Board of Health, to try to obtain one.

The manufacturer will probably give you a recommended dosage, but bear in mind that this isn’t set in stone. What you need to find is your own minimum effective dose. “Minimum effective dose” is a medical term which refers to the amount of a substance you need for the results you want, and above which, the substance doesn’t increase in effectiveness.

The main difference between CBD and Hemp is that Hemp does not contain CBD. CBD and hemp oils are made from different parts of the plant and have different purposes. CBD is a compound found in industrial hemp, and we utilize a whole plant CO2 extraction that allows us to draw the CBD from the plant material and filter out unnatural substances, maximizing pure CBD concentration. While CBD is extracted from the entire plant, minus the seeds, hemp is extracted only from the seeds. Hemp oil is made from pressing hemp seeds and is used in a variety of products. Hemp-seed oil is used as a protein supplement for food, as varnish for wood and, because of its remedial properties for hair and skin, as an ingredient in lotion and soap products. You can buy hemp-seed oil online or at certain food stores, where you can learn about more ways to incorporate it into your diet and hygiene. CBD oil is generally used for medicinal purposes and has shown great promise in treating inflammation, pain, sleeping disorders and even certain types of epileptic seizures.
The CBD utilized in our tinctures is extracted from industrial hemp cultivated in the United States. To further ensure quality and purity, our industrial hemp goes through a supercritical CO2 extraction process to obtain the best possible CBD solution. This solution is then formulated by our board-certified pharmacists into finished products and sent out for third-party testing. Our CBD oil is made with high-quality CBD extracted from organic hemp that is abundant in naturally produced terpenes, oils, vitamins, omega fatty acids, and other components.
There’s also been a lot of talk lately about “microdosing” CBD. This refers to an incremental process of finding your minimum effective dose. You can do this with any concentration of CBD oil, but lower concentrations will take longer. In a 2017 article in Rolling Stone, Dr. Dustan Sulak outlines his protocol for microdosing. You can begin this process by asking yourself three questions:
This may seem like a repeat of an earlier question, but while that question related to concentration of CBD in the product, this is simply a question of how much you’re getting in total. Most bottles are labeled in a similar way – “1,000mg CBD Oil” or “1,000mg Hemp Extract” – which generally means the entire bottle contains a total of 1,000mg of CBD.
×